HUBER S.A.

Another feature is the integral PTFE lined and flared end fitting design which is available for all standard end fittings applied to Bioflex hose assemblies. This provides clean, full-bore flow through the end fitting without any restrictions or entrapment points - unlike conventional fittings, which introduce a bore restriction, also an entrapment crevice at the inside end of the fitting tail. Much higher flow rates are achieved, in comparison with conventional fitings, reducing the time required to fill/empty vessels through the hose.

Bioflex has become the established standard in high purity process fluid applications all over the world, and continues to be introduced into new applications every day.

SIZE RANGE:
3/8" (9.5mm) up to 2" (50mm)

HOSE DESIGN OPTIONS:
Natural or anti-static PTFE, stainless steel braid, with or without an EPDM or silicone rubber cover, or polypropylene, PVDF or hastelloy braid.

END FITTING OPTIONS:
ASA150 or DIN flanges, Sanitary Triclamps (Triclovers), Camlocks, DIN11851, RJT, RJP and SMS fittings, BSPT or NPT fixed males, BSP or NPSM females, JIC, I-Line and many other standard and special fitting designs.

NOTE: The bore size of the hose is maintained right through the end fitting.

ADVANTAGES:

  1. No bore restriction at the ends, as with conventional inserted fittings, therefore higher flow rates.
  2. Free, cleaner flow of fluid, without the fluid entrapment which occurs at the inside end of an inserted fitting.